NRGKICK ADAPTER KIT TO CONNECT TO DIFFERENT CONTACTS

Dobava 3-14 dni.
VPC:191,73 €
MPC:239,66 €

Opis

ADAPTER KIT FOR NRGKICK MOBILE CHARGING STATION
Using a mobile charging station is among the most convenient ways to get a quick AC charge when you're on the go. The ability to use adapters to connect to different outlets allows charging in a number of places with maximum power and safety .

The specific adapters ( NRG-SET-1 ) are designed for the NRGKick mobile charging station and are used to connect the device to :

Standard household socket 230 VAC / 16 A socket
Industrial Euro CEE 230 VAC / 16 A single-phase 3-pin socket
Industrial Euro CEE 400 VAC / 16 A three-phase 5-pin socket

Automatic adaptation of the charging power to the outlet

The original NRGKick adapters are distinguished by the automatic adaptation of the charging power according to the type of outlet to which the station is connected. This ensures that the charging station does not exceed the capacity of the contact, which in turn would lead to a dangerous situation.

Temperature control and overheating protection

Safety comes first and NRGKick has thought of that. The set of adapters intended for the mobile charging station of the Austrian manufacturer are equipped with pins sensitive to overheating. In addition, the adapter designed to connect to a standard household Shuko socket performs a temperature check on both connection pins.

As a result, the charging station can accurately detect if there is a contact problem, leading to overheating. In this way, the possibility of creating dangerous situations is also avoided, as if the contact starts to overheat, the mobile device regulates the current used autonomously.


Check for connection failure

NRGKick checks if there is a problem with the contact to which the charging station is connected and specifically the installation of each of the phases. In case of an irregularity, an LED signal indicates an irregularity that does not allow charging to proceed.

Perfect fit

A good connection of the components is important to prevent unwanted charging stops. The NRGKick adapters grip firmly, while their soft surface and nice grip make them easy to remove when a change is needed.

Manufacturer: NRGKick
Number of phases: single phase / three phase
Maximum Power: 3 kW / 3.7 kW / 11 kW
Maximum current: 13 / 16 amps
Cable type: reinforced rubberized
Cable Size: 3 x 2.5 mm2 (Shuko tip)
Cable length: 1 meter
Contact: NRGKick contact
Plug: plug 230 VAC / 16 A
single-phase 3-pin / 16 A
three-phase 5-pin / 16 A
Degree of protection: IP 44 moisture and dust resistance
Warranty: 24 months
Weight: 1,400 kg.