Charging cable DuosidaType 2 to Type 2 | 7,4 kW 32 А | 5 m
Opis
SINGLE-PHASE CABLE FOR ELECTRIC CAR DUOSIDA TYPE 2 7.4 KW
From which charging stations can I charge with this cable?
Duosida cables (T2A32B) marked "Type 2 to Type 2" (IEC-62196) available at EVPoint are suitable for charging stations with a Type 2 socket. This means that with this cable you can charge your electric vehicle or a plug-in hybrid at almost all public charging stations in Europe with a power of up to 7.4 kW!
What is the optimal charging cable length?
If you use the charging cable in a specific location, such as at home or at work, it is important to choose the length of the cable carefully. It is usually between 4 and 6 meters. If the cable is mainly used when you are on the road (public charging stations) or in different places (where other vehicles may be parked between the charging station and your vehicle), we recommend choosing a longer length.
What is the weight of the charging cables?
The weight of the charging cable can be calculated by adding half a kilogram per meter and one kilogram for the two connectors. An 8-meter charging cable weighs about 5 kilograms. The exact weight can still be found in the technical parameters of the product.
How fast can it charge with this cable?
An electric car can travel an average of about 5.5 km with 1 kWh of stored energy in the battery.
The maximum current for this charging cable is 32A with a maximum of 1 phase (240 V). If this cable is connected to a charging station that supplies 32A single-phase, then this cable can deliver approximately 7.4 kW of continuous power.
So if the car is charged with the maximum 7.4 kW, it means that it can charge 7.4 kWh (kilowatt hour) in one hour, which roughly corresponds to a range of 40 km (5.5 km x 7.4 kWh).
With this, the maximum charging speed of the cable is 40 km / h (when connected to a charger that can provide single-phase charging with 32A).
Please note that the actual charging speed also depends on the charging speed of the car's on-board charger.
The Duosida charging cable has two connectors of type 2 male and female - standard IEC62196-2 .
| Manufacturer: | DUOSIDA |
| Number of phases: | monophasic |
| Cable specification: | 3 x 6 mm² (L1,N,PE) + 2 x 0.5mm² (PP,CP) |
| Operating voltage: | 240 VAC |
| Maximum current: | 32 A |
| Power: | 7.4 kW |
| Connector from the electric vehicle: | Type 2 female, standard IEC62196-2 |
| Connector from the charging station: | Type 2 male, standard IEC62196-2 |
| Cable type: | right |
| Contact resistance: | max. 0.5 mΩ |
| Operating cycles: | > 10,000 on and off cycles |
| Work temperature: | -30°C to 50°C |
| Cable Color: | black |
| Connector color: | son |
| Length: | 5 meters |
| Degree of protection: | IP44 |
| Certificates: | CE, TÜV, IEC, RoHS |
| Warranty: | 24 months |
| Weight: | 2,500 kg. |
